
(805)
384 ∙2369

















| |
Speakers
|
|
 |
T+A
|
CRITERION - TCI Active Loudspeakers
Fully
active, regulated high-end loudspeakers.
T+A has been in existence since 1978. Initially we built only passive
loudspeakers, but very soon - in 1984 - they were joined by fully active
regulated floor-standing speakers. At that time we named this range
SOLITAIRE. For its period the speakers really were unique, and even today
many delighted owners listen to them with satisfaction. In 1988 came the ADL
series, consisting of small, compact active monitors, also featuring
regulation; these speakers found widespread use in professional studios.
When the digital age began in the 1990’s, T+A again took a leading role. The
A2D was the world’s first fully active floor-standing loudspeaker with fully
digital regulation. It was designed to process a digital signal, and
incorporated 11 signal processors which controlled the entire system,
providing an outstandingly linear frequency and phase response, and
generating the steep-rise crossover filters required.
No other company can boast a comparable tradition of building passive and
active loudspeakers as T+A - not to mention analogue and digital electronics
- and we have exploited this virtually inexhaustible fund of expertise to
the full in developing our latest flagships.
In terms of loudspeaker design, much has changed over the last twenty years,
both in the realm of cabinet construction, loudspeaker drive units and
electronics. Our response to these developments has been to equip our new
TCI 1A and TCI 2A active loudspeakers with the finest components, reflecting
the latest technology. The overall concept could be termed classic, in that
the speakers are fully active and regulated, but the implementation is
ground-breaking, incorporating laminated, three-dimensionally molded
cabinets, active electronics and high-performance digital output stages.
Models:
TCI 1A: Floor-stander with electrostatic tweeter and Valve based amp.
TCI 2A: Floor-stander with electrostatic tweeter
Finishes:
Black, silver, Erle, natural maple or walnut dark.
|
CRITERION - TCI Passive Loudspeakers
CRITERION
is a by-word for High-End loudspeakers.
TCI refers to Transmissionline Carbonfibre Impuls.
We have made minor revisions to our Criterion TAL series, and expanded it
with the introduction of three new models of genuine high-end status. The
three new TCI models are based on extremely sophisticated cabinets made of
multi-layer laminated material, which is extremely strong, low in resonance
and rigid. This complex manufacturing process enables us to produce
high-quality cabinets with optimum acoustic qualities. The tweeters of the
TCI models are recessed in the sculpted baffle, and this provides a
significant improvement in their spatial imaging and phase characteristics.
The two large models employ a newly developed, relatively small electrostat
which is responsible for the frequency range above 2000 Hz.
The curved electrostat has good angular dispersion characteristics and its
feather light foil membrane features perfect transient response. As a result
the speakers provide an incredibly clear, natural and pleasant sound image.
Models:
TCI 1 RE: 3-way transmission-line floor-stander with electrostatic
tweeter and tubeamplifier
TCI 2 E: 3-way transmission-line floor-stander with electrostatic
tweeter
TCI 3 R: 3-way transmission-line floor-stander
TCI C 2: Center-speaker
TCI W 2: Active subwoofer
TCI S 3: Surround / Rear-speaker
Finishes:
Rubbed black lacquer, black (RAL 9005), silver lacquer, natural alder or
natural maple
|
CRITERION - TAL Loudspeakers
 CRITERION
is a by-word for High-End loudspeakers. TAL
refers to our latest transmission-line principle. The TAL system involves
newly developed frequency-dependent sound absorption materials which provide
a simple means of preventing interference between the line and the bass
drivers. The result is an extremely linear frequency response in the
fundamental range. At the same time the speakers’ dynamic characteristics,
efficiency and lower limit frequency also gain significantly from this new
development. TAL is actually the abbreviation for Transmission Absorbing
Line, but it might be simpler and just as accurate to translate it as Thrilling, Agile and Lively. The cut-away model of the
TAL 140 shows the complex construction of the transmission absorbing line
principle.
Models:
TAL X1.1: High-end transmission-line floor-stander
TAL X2.1: Compact high-end transmission-line floor-stander
TAL X3.1: Compact high-end transmission-line floor-stander
TAL XM: Compact high-end transmission-line monitor speaker
TAL XC2.0: Center speaker with absorber line
TAL XW: Active subwoofer
Finishes:
Rubbed black lacquer, silver lacquer, natural alder or natural maple.
|
LIGNUM Loudspeakers
LIGNUM
- High-tech + Design
The LIGNUM series, developed by T+A, finally meets this demand: real wood
loudspeaker cabinets which have all the elegance and form factors of their
aluminum equivalents, but with an endearing charm of their own thanks to the
curved, molded wooden cabinet. Based on the manufacturing process developed
for the cabinets of our high-end TCI series, the new LIGNUM speakers are
also made of laminated beech. This sophisticated - and necessarily expensive
- technology enables us to produce very tight-radius curves, and small, very
slender cabinets which still have a relatively high internal volume; this is
crucial for good bass reproduction in any speaker.
Although the cabinet sides are only 10 mm thick, they are stiffer and better
at damping resonance effects than conventional components of twice the
thickness. The net result is that the LIGNUM cabinets possess all the basic
requirements for superb sound qualities as well as offering stunning
appearance.
The technical equipment of these speakers is just as refined as the cabinets
themselves. All models feature our unique annular super-tweeter for the
high-frequency range; this unit has been widely admired and is now produced
in a further developed form; its significantly improved peak handling,
linear frequency response, enormous dynamic capability and low harmonic
distortion provide a level of high-frequency reproduction which is unique in
this class. The extremely long-throw bass / mid-range units offer a totally
linear response in the mid-range area; a characteristic which is very
important in view of the D’Apolito arrangement of the bass / mid-range
drivers employed. The symmetrical position of two bass / mid-range units
around the high-frequency driver provides virtually perfect sound imaging
characteristics, and this benefits surround set-ups as well as conventional
stereo reproduction. The sound image appears to be completely separate from
the loudspeakers themselves, and the listening room has much less influence
on the sound. High-quality, accurately calculated crossover units ensure
optimum frequency and phase response, combined with exemplary throw
characteristics and peak handling.
All the loudspeakers in the family share very similar overall sound
qualities: natural, wide-ranging, dynamic and totally uncolored.
The new LIGNUM series comprises three models:
LGS 10: Floor-standing speaker
LGS 20: Small floor-standing speaker
LGR 10: Bookshelf speaker
Finishes:

Natural maple glossy, cherry stain glossy, walnut dark glossy, white, black.
|
Talis Speaker Series
The TALIS series of loudspeakers was introduced to the market for the first
time in the year 2000, and immediately set new standards:
refined design, superb workmanship and wonderful sound. Every aspect of the
loudspeaker maker’s art had to be re-thought in order to generate powerful
bass from such extremely slender cabinets, and the successful outcome was
only possible through the use of the latest aluminum technology.
The cabinets are manufactured using complex profiled extrusions, which
combine thin walls - for large net volumes - with extremely high strength.
All covers and plinths take the form of solid aluminum plates. The cabinet
surfaces feature durable finishes applied using extremely sophisticated
processes.
We have now cautiously revised and improved this successful range, retaining
the proven aluminum technology, but with further improvements to the design.
Gently rounded front grilles and plinths give the cabinets an even more
elegant appearance. The standard finishes are aluminum, black and white,
which are a superb match to the latest trends in furnishing. The acoustic
characteristics and qualities of the new TALIS loudspeakers offer further
significant improvements. Reinforced baffles have enabled us to install
recessed, flush-mounted drive units, and the result is a clear enhancement
in linearity of frequency response even off-axis, providing a further
improvement in the already first-class radiation characteristics in the
mid-range.
Models:
TLS
10: Floor-stander
TLS 20: Small floor-stander
TLP 10: Center- or panel-speaker
TLR 20: Bookshelf of rear speaker
TLS 1: Small floor-stander
TLS 3: Floor-stander
TLR 1: Bookshelf speaker
TLC 3: Center speaker
TLR Mini Monitor speaker
TLC Mini Small center speaker
TALIS Sets with TLR Mini and TLC Mini
TLW 2A: Small active subwoofer
TLW 4A: Active subwoofer
|
MartinLogan
|
ESL Series Speakers
ESL Series
loudspeakers embody our most sophisticated engineering and design. Featuring
patented CLS™ (Curvilinear Line Source) electrostatic panels and many other
advanced MartinLogan technologies, they effortlessly reveal every subtle
nuance of recorded sound.
Summit...
Unparalleled Sound
Culminating decades of MartinLogan research and development, the Summit™
more than lives up to its name, rendering music and soundtracks alike with a
richness, subtlety, impact, and depth
unmatched by any other loudspeaker.
Listening to a system anchored by a pair of Summits is a transformational
experience for anyone who appreciates exquisite sound reproduction.
Key to
the Summit's revolutionary performance is our advanced XStat™ electrostatic
panel, which covers most of the audible range, from the midrange to beyond
the limit of human hearing, with unprecedented accuracy. A perfectly
integrated PoweredForce™ woofer section – the most advanced woofer
technology available in a full-range speaker – supplies an authoritative
bass foundation from its twin 10-inch aluminum-cone drivers, effortlessly
extending the Summit's response to frequencies below where even most
subwoofers reach. Yet the Summit never, ever sounds heavy.
Nor does it look heavy. In fact, it almost seems to float in the air. We
believe you'll agree that the Summit looks nearly as good as it sounds –
maybe because the way it looks is actually sort of like the way it sounds.
MartinLogan electrostats are a special breed of speaker, and the Summit is
the most special of them all. Hearing is believing.
Summit Features:
XStat™ Transducer, AirFrame™ Technology, Vacuum Bonding, Curvilinear Line
Source Electrostatic Panel, PoweredForce™ Bass, Low-Distortion Aluminum-Cone
Woofers, MicroPerf™ Stators, Vojtko™ Crossover, Portless Enclosure, Dipole
Sound Radiation, 25-Hz and 50-Hz Level Controls, Bi-wirable Toolless Binding
Posts, Custom Feet and Energy Transfer Coupler Spikes.
Vantage... No Compromise
Based on the state-of-the-art Summit™ loudspeaker, Vantage offers
unprecedented performance for its size and price. Key to this achievement is
our PoweredForce™ active woofer technology, which generates deep,
articulate, dynamic bass from an astonishingly compact cabinet. An XStat™
electrostatic panel handles the midrange up, delivering the smooth,
pristinely detailed, and richly ambient sound that is the hallmark of
MartinLogan speakers. No ordinary speaker comes close.
Living in the shadow of a speaker as impressive as the Summit ™ is no easy
thing. Vantage rises to the challenge by compressing Summit's groundbreaking
ultra-high-resolution XStat ™ , AirFrame ™ , and PoweredForce ™ technologies
into a surprisingly compact package – at a surprisingly compact price. What
do you give up? Basically, about a half octave of low bass and some peak
output capability. No fooling, it just knocks us out what the kid sis can do
– you have to hear it to believe it.
Vantage Features:
XStat ™ Transducer, AirFrame ™ Technology, Vacuum Bonding, Curvilinear Line
Source Electrostatic Panel, MicroPerf ™ Stators, PoweredForce ™ Bass,
Low-Distortion Aluminum-Cone Woofers, Vojtko ™ Crossover, Dipole Sound
Radiation, Bi-wirable Toolless Binding Posts, Energy Transfer Coupler
Spikes.
Vista... Exceptional XStat™ Performance at an Affordable Price
Vista is MartinLogan's most affordable XStat™ equipped floorstanding
speaker. Incorporating ultra-high-resolution XStat™ and AirFrame™
technologies originally developed for the cost-no-object Summit™; Vista is
capable of an exceptionally dynamic and realistic performance. A single
aluminum cone woofer, compact cabinet, and bi-wire capable toolless binding
posts further reinforce Vista's high-end pedigree. The result? A stellar
performer at an exceptional price.
Stage... Ultimate-Performance Electrostatic Center Speaker
Designed primarily to serve as the center in a home theater incorporating
other XStat™-based MartinLogan electrostatic speakers, Stage™ is versatile
enough to handle left-, right-, and surround-channel duties as well. It's
dual 6.5-inch aluminum-cone woofers and advanced Vojkto™ crossover
seamlessly integrate a solid bass foundation with the astonishingly
transparent, detailed midrange and treble produced by its XStat panel. A
single-pivot bracket/stand facilitates set-top, shelf, on-wall, or on-floor
placement.
Motif...
Compact Electrostatic Center Channel
Motif is an
amalgam of technologies carefully balanced to maximize performance and
installation flexibility. A state-of-the-art XStat transducer, MicroPerf
stators, ClearSpar spacers, and vacuum bonding combine with dual
aluminum-cone woofers and a proprietary Vojtko™ crossover to provide
maximize efficiency for an effortless, unlimited dynamic presentation. The
result is rich, lifelike, stunningly detailed sound that blends seamlessly
with our other electrostats and enhances any home theater.
Voyage... Ultimate-Performance In-Wall.
The world's most sophisticated and elegant architectural loudspeaker, Voyage
sounds so clean and dynamic, you'd think it were a superb standalone design.
Not surprising, since it borrows so much from our own, including Advanced
Thin Film drivers and high-resolution woofers. A rigid aluminum chassis and
die-cast mounting locks enhance performance and ease installation, while an
adjustable tweeter-alignment sphere, paintable end caps, and a selection of
grille colors provide incredible adaptability.
Passage... Versatile, High-Performance
In-Wall
Just slightly
more than half the size of the Voyage, this elegant, affordable in-wall
offers amazing quality and versatility. Advanced Thin Film driver
technology, sophisticated woofer engineering, and no-compromise crossover
design combine to produce wonderfully detailed and involving sound. A rigid
aluminum chassis and die-cast mounting locks enhance performance and ease
installation, while an adjustable tweeter-alignment sphere, paintable end
caps, and a selection of grille colors provide incredible adaptability.
Descent
i... Ultimate Bass.
Building on the
groundbreaking technology of the original Descent, the Descent i
incorporates new features and enhancements that simplify system integration
while improving performance. Its signature three-driver, force-canceling
configuration virtually eliminates bass-blurring cabinet resonance. And each
rugged, custom-built aluminum-cone driver is servo-locked to its own
sophisticated, high-power amplifier. The result is dynamic, unrestrained
output to the very lowest frequencies, yet with clarity and definition
approaching that of electrostatic transducers.
Depth i... Deep, Powerful, and Detailed
Packing all of
Descent is innovative technology into a cabinet 40% smaller, Depth i brings
deep, powerful bass with electrostatic-like detail to any audio system,
whether for high-end stereo music listening or multi-channel home theater.
Its three-driver, force-canceling configuration virtually eliminates cabinet
resonance and the resulting bass blur that plagues conventional subwoofers,
while sophisticated amplifier and triple-servo control technology ensure the
purity and accuracy of the sound from the drivers.
Grotto
i... Compact and Accurate
A powerful 300
watt (900 watt peak) low-distortion, high-reliability amplifier gives Grotto
i extremely articulate bass without need of exaggerated amplifier power
ratings or transient-blurring ported or passive radiator enclosures common
to many modern subwoofers. A proprietary servo system further ensures that
output from Grotto i's 10-inch high-resolution aluminum cone woofer is
dramatically free of distortion and provides a faithful replica of the audio
input signal.
|
Design Series Speakers
MartinLogan
innovation delivers extraordinary performance and sound for any lifestyle.
From electrostatic and ATF™ (Advanced Thin Film) speakers to
take-no-prisoners subwoofers,
our
décor-friendly Design Series
enhances any stereo music or home theater system while complementing any
room. Enjoy a rich musical and cinematic experience at
an unrivaled price.
Purity... The World's First Powered Hybrid Electrostatic Loudspeaker
Purity marks an
exciting new direction for electrostatic loudspeaker design. Internally
powered with a 200-watt high-resolution switching amplifier, Purity allows
an unprecedented level of system connection flexibility. Equipped with a
standard RCA line-level input, Purity is able to connect directly to devices
such as digital music players, flat screen televisions or even computers.
Additional speaker level inputs give Purity the flexibility to work with
receivers or other equipment that might not have a line-level pre-amp out
option.
Source... High-Performance Electrostatic Technology At An Affordable Price
Source is the
world's most affordable high-performance hybrid electrostatic loudspeaker.
Incorporating ultra-high-resolution AirFrame™ technology (originally
developed for MartinLogan's Summit loudspeaker) Source is capable of an
exceptionally dynamic and realistic performance. An 8-inch woofer, MiniETC™
(Energy Transfer Coupler) spikes, and high-end crossover engineering further
reinforce Source's high-end pedigree. The result? A stellar performer at an
exceptional price.
Montage...
MartinLogan Performance on a Budget
Montage combines
Advanced Thin Film drivers with cabinet, woofer, and crossover technologies
derived from the award-winning Clarity to deliver stunning,
electrostatic-like sound. Distributed, full-surface drive and dipole
radiation give ATF™ drivers the combination of crisp detail and openness for
which electrostatics are legendary. The most affordable of our
high-performance floorstanding speakers, Montage can serve any function in a
home theater or stereo music system and is compatible with all audio/video
equipment.
Matinee... Compact Electrostatic
Center Channel
Matinee is a
highly evolved expression of the same ideas and engineering that spawned the
Stage and Motif speakers. A state-of-the-art Generation 2 MicroPerf
electrostatic panel, dual paper-cone woofers, and highly sophisticated
Vojtko crossover deliver unrivaled precision and center-channel
intelligibility. Carefully hand-built using only the finest components,
Matinee's crossover preserves even the most subtle sonic nuances while
handling the full dynamics of any source.
Fresco
i...
Compact and Versatile
Advanced Thin
Film driver technology packs this trim, low-profile package with
performance. Extending just 6 inches from the wall, Fresco i is a perfect
match to the latest generation of plasma displays. Twin aluminum-cone
woofers deliver firm, clean bass that blends seamlessly with the sound from
the high-resolution ATF™ panels. The speaker mounts horizontally or
vertically to a wall or ceiling or on an optional shelf or floor stand.
Vignette... Versatile and Affordable
Engineered
throughout to our highest standard, Vignette delivers impact and performance
unprecedented for a speaker of such light weight and compact dimensions.
Advanced Thin Film drivers, long-excursion low-mass woofers, and
sophisticated crossover combine to produce sound with a lifelike clarity and
openness approaching that of our electrostatic designs. Vignette is also
very adaptable, working equally well whether mounted horizontally or
vertically with the included wall bracket.
Ticket... Compact, Affordable In-Wall
Significantly
smaller than Passage, the elegant, affordable Ticket is nonetheless a very
strong performer. Its dual long-throw, high-resolution woofers, integrated
dome tweeter, and advanced Vojtko™ crossover deliver rich, clear sound and
superb stereo imaging. Ticket also features paintable end caps and a
selection of grille colors for perfect matching with any décor. Its quick
and easy, yet very secure, installation system is the same used in Voyage
and Passage.
Abyss...
Flexible Bass Performance
Abyss represents
MartinLogan's ultimate Design Series subwoofer. Featuring a high-resolution
12-inch aluminum cone driver Abyss effortlessly provides exceptional bass.
Performance aside, the real story is Abyss' innovative user-configurable
design. Capable of both front- and down-firing operation and featuring
flexible crossover controls Abyss is capable of providing superb bass from
any location - whether in a corner, under or behind furniture, or even
installed in a cabinet.
Dynamo... Compact Affordable
Performance
Every element of
Dynamo, from driver to amplifier to crossover to cabinet, is meticulously
designed and manufactured to our highest standard. The result is staggering
low-frequency performance for a subwoofer of its size and price. And its
versatility is second to none. Variable phase and low-pass crossover
controls enable custom tailoring to any system and environment. Dynamo can
also be quickly reconfigured for either down- or front-firing operation.
|
Amphion Loudspeakers
|
helium2
Due
to the success of helium+ helium2 project was not rushed at any point and
our design team had more than sufficient time to come up with a small
benchmark speaker.
The feedback from the market indicates that the time was well spent. Well
proven helium titanium tweeter together with polypropylene midrange from
creon blend perfectly together to produce cohesive and natural sound.
helium2 might be the most versatile amphion product yet and user
friendliness and flexibility are the key words.
As speaker is fully magnetic shielded it does not present any restrictions
on speaker placement or –usage. In addition to being a main speaker in a
small system helium2 can be used together with a subwoofer as a superb
satellite speaker. It is also important to note, that helium2 is designed to
act as a center speaker.
In addition to helium2s creon and athene will be especially happy having
helium2 in the middle, as they share the same drivers (25 mm titanium
tweeter and 5,25 nomex bass) and have the same crossover point of 1500 Hz.8
ohm nominal and 7 ohm minimum impedance ensure, that helium2 is an easy load
to any amplifier - sensitivity is 86dB.
helium2 is available in following
baffle/cabinet combinations:
   
silver/natural birch, black/cherry, silver/silver and black/black.
Finnish
birch veneer is used in both birch and cherry colored versions.
|
athene2
athene
is amphion's reply to numerous requests from both dealers and end customers
alike for a reasonably priced slim floorstander. Not wanting to make any
compromises to the sound quality has caused long hours for our designers. As
we wanted to make the speaker as wife friendly as possible the project has
been highly challenging. To symbolize this painstaking design process we
have named the new model athene, who was the goddess of war, wisdom, and
crafts.
athene is a D'Appolito configured 2-way speaker equipped with 25 mm titanium
tweeter and 14,5 cm nomex bass. The crossover point is 1500 Hz, which
ensures pinpoint imagining and allows a perfectly functioning D'Appolito
driver array.
Also the sensitivity is up at 87 dB, which means that despite being a 4 ohm
speaker athene is easy to drive with wide range of amplifiers. athene forms
a reference point in its price class for both sound quality and stylish
looks. Finally a high end speaker, which can challenge even the lifestyle
products in their own interior decoration game.
athene2 is available in:
  
birch, silver and cherry.
|
creon2
amphion
creon is built up on the same solid technical foundation as xenon, which has
already been rated as one of worlds best and most attractive loudspeakers.
Even if sold at a much lower pricepoint, creon introduces some of the same
ingenious elements, which have made xenon so successful. Room reflections
will be minimized due to U/U/D-enclosure system, which creates a cardioid
diffusion pattern.
creon is a 3-way construction with 25 mm titanium tweeter, 14,5 cm nomex
midrange and 21 cm side firing sandwich polypropylene bass. The crossover
points are 1500 Hz and 150 Hz.
Despite all the impressive technical data, creon’s true beauty lies in its
captivating sound, which is nicely complemented by its immaculate looks.
Pictures do not do her justice, and therefore we urge you to visit your
closest dealer to experience everything first hand.
creon2 is available in:
  
silver, birch and cherry
|
origo
To
cater for the ever increasing home theater market amphion has released the
long awaited center speaker - origo. Origo follows the well proven amphion
design principles, and therefore is quite unconventional as a center.
In order to introduce slimmer enclosures and increase power handling most of
the manufacturers are using double midranges in their center speakers.
Contrary to the general knowledge a standard D’appolito configuration is
only suitable for vertical use. When used horizontally it causes break-up
problems. We at amphion can not follow this unhealthy trend and use this
formula which will compromise the sound.
amphion’s basic concept of point source design is ideally suited for a home
theater speaker, as it functions identically well in both vertical or
horizontal positions. In order to optimize home theater enjoyment origo
blends in perfectly with other amphion products.
origo is available in:
   
black, silver, birch and cherry
|
argon2
argon2
is a follow up for the most successful amphion model to date - argon. Many
consider the classic argon to be one of the best two-way mini monitors in
the market. Therefore the expectations for argon2 have been especially high.
In order to continue the fine argon tradition the follower has gone through
painstaking R&D process and everything has been reworked: slimmer, more
rigid enclosure, bigger highly precise tweeter and a bass driver with high
force factor which increases the speed and tonality of the bass. Naturally
also the crossover topology is totally new and now the crossover point lies
at breathtakingly low 1200 Hz! Despite the 85 dB sensitivity argon2 is an
easy load for any amplifier, as the minimum impedance lies at 7 ohms.
Even if it was not one of the design goals, we are happy to note that argon2
is also fully magnetic shielded and therefore can be freely placed, even
close to a TV set. Despite the differences in the bass driver argon2 blends
perfectly together with amphion’s center speaker origo for multi channel
applications. Despite being highly suitable for multi-channel argon2 is a
true high end mini monitor. The feedback from the market clearly indicates,
that argon has a worthy successor in argon2.
argon2 is available in:
   
cherry, birch, silver and black.
|
xenon
xenon
might just be the most beautiful loudspeaker in the amphion range. But in
this case looks merely follow function. Nothing has been sacrificed in order
to design a premium quality loudspeaker, which will ensure maximum musical
enjoyment while keeping a listening space livable. xenon introduces
amphion's ingenious hypercardioid enclosure, which minimizes room
reflections starting already from low frequencies (150 Hz upwards).
Sculpture-like xenon has a narrow footprint and due to hypercardioid
diffusion pattern can be positioned relatively close to back and side walls.
Newly introduced BAS (Bass Adjustment System) releases xenons full
potential. BAS always ensures perfect bass response level, regardless of
room measurements or speaker placement. xenons can be positioned solely
based on the convenience of daily life and still enjoy perfect sound. Due to
the combined effect of U/D/D and BAS the xenons are perfectly happy close to
the walls or even in the corners still producing optimum sound. xenon's
modern good looks and easy placement ensure, that it will achieve an
unbeatable WAF-rating (wife acceptance factor).
For the more technically inclined it can be mentioned that xenon is a 3-way
design having 25 mm tweeter, 17 cm mid and 21.5 cm woofer, which are all
made of aluminum.
The crossover points are 150 and 1200 Hz. The total bass
adjustment range is 3 dB.
xenon is available in:
   
cherry, birch, silver and black.
|
krypton
amphion
krypton is the culmination of the amphion philosophy. krypton performs as an
ultimate symmetrical point source due to low crossover frequency and
d’Appolito configuration. U/D/D (Uniformly Directive Diffusion) system
enables a clean hypercardioid diffusion pattern from 120 Hz onwards.
krypton is amphion’s statement product, which surely will create plenty of
waves in the global audio community. Pricing will follow amphion’s
philosophy of "music to the people" and we believe that it will offer
unmatched value in the reference speaker league. The first feedback
indicates, that krypton will be a worthy contender for anything in the
market, regardless of the price.
krypton is available in:

birch.
|
ion
Beauty
and the bass
Amphion Ion is physically small, but do not let your eyes fool you. Sound is
surprisingly full range and full of tones and resolution. Soft rounded
shapes and classic measurements make ion timeless, yet modern. When you
demand the best possible sound, but do not want to dedicate your room to
audio only ion is your choice. Which color is the right one for your
interior: white, black or silver?
Awarded design
At its introduction Ion was awarded a coveted design price at respected
Habitare exhibition as it was chosen by the Finnish Interior Journalists
Association as one of their favorites: “Small and petite, but with top class
sound”.
Innovative U/D/D technology
Ion uses Amphion’s proprietary U/D/D technology (Uniformly Directive
Diffusion) which allows speaker to work at optimal level in all kinds of
rooms and makes positioning a breeze. Ion performs superbly in both
two-channel and multi-channel applications
ion is available in:
  
silver, white and black.
|
impact 500 subwoofer
Solid
foundation for your music
Feeling is hearing
amphion impact’s solid closed enclosure houses a powerful 12” long-throw
nomex driver, which is quick and powerful, yet resolving. The power reserves
and current driving ability of 500 watt D- class amplifier guarantee
unstrained performance even at larger-than-life listening levels.
impact 500 is available in:

black.
|
Experience
an unforgettable demonstration.
Contact:
vin@swaraav.com
Swara AV Inc. ∙ Telephone:
(805)
384
∙
2369
∙ Support:
support@swaraav.com
Personalized Service By Appointment
Only, Please Call.
     |
|